Skip to main content

Liquid Epoxy Type E-WF

Wet and Force-cure Epoxy for Superior 3-layer Corrosion Protection

Liquid Epoxy Type E-WF

Coating continuity.

Improved cathodic disbondment resistance.

Versatility in application methods.

Saves time.

Canusa-CPS Liquid Epoxy Type E-WF is a two part epoxy applicable in Wet or Force Cure conditions.

It is used as the primary layer with GTS-65-ISO and GTS-65-EN Canusa-CPS Heat Shrink Sleeves. With versatility in application methodology, epoxy primer type E-WF allows for use in great variety of environments where 3-Layer Heat Shrink Sleeve field joint coating is required. It is composed of a specially formulated 100% solids epoxy system, which does not use any volatile solvents. This ensures that the thickness of the epoxy layer does not change as it cures.

Coating Continuity

The Liquid Epoxy Type E-WF layer offers equivalent corrosion protection to FBE primary layer in 3 layer polyethylene and 3 layer polypropylene mainline coated pipelines.

Improved Cathodic Disbondment Resistance

Liquid Epoxy Type E-WF will improve the Cathodic Disbondment resistance results for hotmelt type adhesives when compared against bare steel substrate.

Versatility in Application Methods

Epoxy formulation compatible with both wet and force cure methodology to meet needs in variety of different project environments.

Saves Time

The improved chemical bonding that is achieved from the adhesive to the epoxy layer allows for reduced sleeve installation times due to lower heat requirements.


Oil & Gas
Offshore Pipelines
Onshore Pipelines
Repair & Rehab